Products Description

The shape of this project is unique, the internal details and angles are quite complex, and the production and construction are difficult. After repeated research and discussions by the company's technical and engineering departments, and strict implementation of the drawing requirements, the designer's ideas were truly restored in the end. After the completion of the project,it was highly recognized by the general contractor.

About steel structure bridge

Steel bridge, the main bearing structure of the rigid bridge. The beam and the leg or pier (platform) body form a rigid connection. Because of the consolidation of the pier beam, the whole beam and pier are stressed.

The pier not only bears the vertical pressure caused by the load on the beam, but also bears the bending moment and horizontal thrust. The structure can be divided into portal rigid frame bridge, inclined leg rigid frame bridge, T-shaped rigid frame bridge and continuous rigid frame bridge.

The main beam of steel bridge generally needs to bear positive and negative bending moments, and the cross section should adopt box section. The force of the main beam of continuous steel bridge is basically the same as that of continuous beam, and the cross section form and size are basically the same as that of continuous beam.

Advantages

1. The construction period is very short, the actual construction period can be within a few days. Because all structural components are prefabricated in the factory, pull to the site lifting can be.

2. Easy to disassemble. If it needs to be removed later, the bolts can be removed directly and all the steel can be reused in other buildings.

3. Light and beautiful appearance

4. Convenient post-processing. Let's say I need to add something to it, just solder it on. Many advantages, above are the main points.